|
AMS-Oiler™ high-tech oil pre-charger
|
|
AMS-Oiler™ Approximate
Dimensions
|
|
AMK-01 |
7.40
x 2.50 x 2.50 inches |
|
AMK-02 |
7.90
x 2.50 x 2.50 inches |
| |
End Dry Starts with the
AMS-Oiler™
The needs of automotive and
industrial equipment have continued to place increasing demands
on the lubrication industry. Over the years, AMSOIL research and
development has responded to changes in the industry by
developing products that keep AMSOIL on the cutting edge. The
new AMS-Oiler™ is the most recent example in a long line of
top-quality innovations from AMSOIL.
Independent studies have
concluded that engine wear during start-up is a major concern.
Even though engine components remain dry for only a short period
of time at ignition, when this circumstance is multiplied by the
400 to 600 dry starts a year by the average motorist, the
potential for harmful metal-on-metal contact and significant
wear is great.
The AMS-Oiler™ is an oil
pre-charger that puts an end to dry-engine starting. Typically,
an engine that sits idle for even a short period of time will
operate relatively dry upon starting before oil is able to fully
lubricate the system. In fact, the automotive industry estimates
that up to 50 percent of engine bearing wear occurs during the
starting process. Indeed, the superiority of AMSOIL motor oils
minimizes start-up wear by clinging to the metal surfaces, but
even more can be done to concentrate the oil on the critical
wear areas in an engine. With the AMS-Oiler in place, 160 cubic
centimeters of oil is injected directly on the engine bearings
and other wear sensitive surfaces upon turning of the
key, giving instant protection to vital engine components.
AMK-02
"stand-alone" configuration
The AMS-Oiler™ outperforms gas
and air charge systems. When the ignition key is turned to the
on position, an audible alarm sounds while a 12-volt DC solenoid
initiates the AMS-Oiler's operation. When the oil delivery
process is complete, the alarm ceases and the operator can start
the engine. The engine can be started at any time without damage
to the AMS-Oiler™, however, the AMS-Oiler™ is recharged by the
pressure generated by the engine's oil pump. Complete recharge
is accomplished within 40 seconds. The absence of a gas or air
charge eliminates the possibility of cross-contamination of
dirty gas or air with the engine oil, keeping the oil pure and
performing optimally. The design of the AMS-Oiler™ reservoir
also protects the unit from ambient temperature fluctuations.
Specially crafted by AMSOIL
technicians, the AMS-Oiler™ is the culmination of extensive
research and development. “Our products are exceptional when it
comes to reducing wear during operation,” said Technical
Director Dave Anderson. “The weakest link in the chain, however,
was still during startup. With the AMS-Oiler™, we’re closing
that last gap.”
With an extremely rugged
chrome plated hi-grade carbon steel reservoir and anodized
aluminum base, the AMS-Oiler™ is crafted to withstand severe
service and to perform reliably in any personal, commercial or
industrial application.
Unlike other pre-charger
systems, the AMS-Oiler™ has no bulky moving parts which need
maintenance and does not rely on pressurized gas to function.
The AMS-Oiler™ is a self contained, streamlined unit that has a
mechanical life cycle exceeding one million engine starts, with
no maintenance required. The AMS-Oiler™ is self-lubricating with
an integrated overpressure protection device that protects units
from retaining pressures in excess of 90 p.s.i.
AMK-01 "bolt
on" configuration
In order to meet consumers’
needs, AMSOIL has designed two AMS-Oiler™ models to cover all
applications. The first model, AMK01, is crafted to attach
directly to the AMSOIL Dual-Remote By-Pass Filtration Systems
BMK13, 15 through 18. The second model, AMK02, is designed as a
stand-alone system. AMK01 and AMK02 are designed for pre-oiling
engines up to 500 CID (cubic inch displacement)(8.2L). The
AMS-Oiler™ retro-fit applicability to the AMSOIL By-Pass
filtration systems provides a convenient perch for quick
installation. The stand-alone AMS-Oiler™ mounts easily at any
angle to accommodate virtually every engine. The AMS-Oiler™ kit
comes with all of the necessary components to complete
installation.
With the new AMS-Oiler™,
AMSOIL continues to make lubrication history, with quality still
the number one priority.
PRODUCT MODELS
AMK-01,
the “bolt
on” configuration, is designed for use in
combination with the BMK13, 15 through 18 Series Dual Remote
Mount Filtration Systems.
AMK-02
is a “stand-alone” configuration designed for universal
application. The AMK02 can be used with any engine application
and mounts at any angle.
AMS-Oiler™ Benefits
- Eliminates dry starts, reduces engine
wear
- Retrofit with Dual Remote Filtration
System
- Compact design, mounts at every angle
- Ideally suited for gas & diesel
applications
- Capacity to pre-lube up to 500 CID (8.2L)
engines
- Promotes easier starts in extreme cold
weather
- Closed system prevents contamination
- Self Lubricating, no maintenance required
- Operational cycle life exceeds 1,000,000
engine starts
- Install and forget
AMS-Oiler™ Market
Applications
While every engine can benefit from
the use of an AMS-Oiler™, vehicles especially prone to frequent
starting and engines that sit idle for extended periods of time
would extend their engine life with the simple addition of an
AMS-Oiler™. An AMS-Oiler™ can provide the instant lubrication
necessary to save these engines significant wear and prevent
damaging metal-on-metal contact.
- Taxicabs
- Delivery Fleets
- Marine Applications
- Service Vehicles
- Family Vehicles
- Personal Vehicles
- Construction Equipment
- Farm Equipment
- Hobby / Collector / Competition Cars
- Emergency Generators and Pumps
- Tow Vehicles
- Motor Homes
- Cold Weather Application
|
